+31-512-33 44 44 vehiclelifts@stertil.nl

Unique Crossbeam-Free Design

4-Post Platform lifts 17.5t and 25t

For all of those ultra heavy duty jobs. The Stertil-Koni Ultra 4-Post Platform lifts with the unique crossbeam-free construction allowing for maximum height lifting. This minimal moving parts 4-Post Lift means it requires less service and repair maintenance than the conventional platform lifts. The truly economical heavy weight lifter.

Brochure download
  • All heavy duty vehicles
  • Ultimate safety locking
  • Optimum accessibility

Operational Features

Specifications

ModelST 4175ST 4250
Lifting systemHydraulicHydraulic
Lifting capacity 17,500 kg25,000 kg
Lifting height1,900 mm1,900 mm
Lifting time 72 seconds72 sec
Drive-on height230 mm285 mm
Platform lengths6/8/9/10/11.5 metres6/8/9/10/11.5 metres
Lifting systemHydraulicLifting capacity 17,500 kgLifting height1,900 mmLifting time 72 secondsDrive-on height230 mmPlatform lengths6/8/9/10/11.5 metres
Lifting systemHydraulicLifting capacity 25,000 kgLifting height1,900 mmLifting time 72 secDrive-on height285 mmPlatform lengths6/8/9/10/11.5 metres

Extended Tandem Configurations

For long vehicles the Stertil-Koni 4-Post lift can be extended in tandem configuration, ideal for articulated buses and other long vehicles up to 11.5 metres.

The design of the Stertil-Koni 4-Post lift means that  jacking beams can also be mounted to the lift allowing for more space on the workshop floor for example with wheel changes.

Extended Tandem Configurations

Safety: Independent Locking System

Mechanical Locking: the highly safe Stertil-Koni patented gravity mechanical locking system works entirely independently of the lifting system and is permanently enabled. 

Hydraulic: each lifting cylinder is fitted with an oil flow control valve that is enabled throughout the lifting process. The specially integrated overpressure valve prevents overloading on each lifting unit.

Maximum safety: The Stertil-Koni 4-post vehicle lifts meet the most stringent safety requirments in the world. The CE (Europe), ALI-ETL (USA) and CSA (Canada) hallmark is standard.

ST 4175

This lift has a lifting capacity of 17,500 kg. Available in platform lengths from 6 up to 11.5 m. 

Often used to accommodate low clearance vehicles. 

ST 4250

This lift has a capacity of 25,000 kg. Available platform lengths from 6 up to 11.5 m. Tandem configurations are possible. 

Models

  • ST 4175
  • ST 4250

Superior Technology

The hydraulic system for the 4-post lifts are electronically controlled. This ensures a smooth lifting an lowering cycle, even in the event of an extremely uneven load distribution of the vehicle. With the absence of wear-susceptible parts (eg ropes and pulleys) maintenance is reduced to a minimum for our four post vehicle lifts. Other innovative features are: programmable lifting height, impact resistant LED lights that switch on and off automatically above floor level and a warning signal for foor protection.

Flexible installation width

The absence of any crossbeams between the platforms allows the ideal width to be set at the time of installation, ensuring easy access for personnel and for axle stands transmission jacks and others. the platforms can be adjusted on both sides. tthis signficantly extends the working range of the 4-post vehicle lifts.

 

THE UNIQUE CROSSBEAM FREE DESIGN

Request more information